logo
Richiedere un preventivo |
Casa ProdottiColla epossidica AB

Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

Tutti i prodotti

Colla epossidica AB

(103)

Adesivo acrilico modificato

(31)

Non più colla dei chiodi

(17)

adesivo a filo

(22)

creatore della guarnizione

(36)

502 supercolla

(8)

Sigillante per piastrelle in ceramica

(7)

Hardware Colla elettronica

(14)

Colla per autoveicoli

(14)

Colla per la riparazione domestica

(12)

Colla per arredamento

(7)
Sono ora online in chat

Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation
Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

Grande immagine :  Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

Dettagli:
Luogo di origine: Hunan, Cina
Marca: DEYI
Numero di modello: DY-EP600-1
Termini di pagamento e spedizione:
Quantità di ordine minimo: 3000
Contatto

Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

descrizione
Materiale principale: EPOXY Colore: R: Nero; B:Grigio Bianco
Viscosità a: 5000-15000 cps Viscosità b: 1000-3000cps
Tempo di operazione: 1h Rapporto di miscelazione: 10:9
Intervallo di temperatura: -60~125°C Durezza: 80 ~ 85A
Resistenza dielettrica: > 25kv/mm Resistenza alla trazione: > 40 MPa
Piegare la forza: > 80 MPa Condizione di cura: 85 ℃/3-5 ore+105 ℃/6-8 ore
Temperatura di preriscaldamento: 50-60℃ Tempo di schiumatura: 5-10 minuti
Tempo di cura: 85 ℃/3-5 ore+105 ℃/6-8 ore
Evidenziare:

Dielectric Strength >25kv/mm Electrical Potting Adhesive

,

Tensile Strength >40Mpa Epoxy Resin Potting Compound

,

Bending Strength >80Mpa Liquid Epoxy Resin

Electrical Potting Adhesive - Liquid Epoxy Resin for Medium-High Voltage Insulation
High-Temperature Resistant Epoxy Resin Potting Compound

This electrical potting adhesive provides superior protection for electronic components with excellent high temperature resistance and electrical insulation properties.

Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation 0
Key Features
  • Eliminates adverse effects of UV light, ozone, moisture, and chemicals on circuits
  • Excellent high and low temperature resistance
  • Superior electrical insulation performance
  • High thermal conductivity with low expansion rate
  • Waterproof, oil resistant, dust proof, corrosion resistant
  • Excellent aging resistance and cold/hot impact resistance
Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation 1 Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation 2
Application Method
  1. Preheat components A and B at 50-60℃ for 2 hours before mixing
  2. Mix at mass ratio A:B = 100:90, stirring thoroughly
  3. Vacuum defoaming for 5-10 minutes after mixing
  4. Pour mixture into product promptly to maintain fluidity
  5. Cure at 85℃ for 3-5 hours followed by 105℃ for 6-8 hours
Packaging & Shipping
Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation 3
Frequently Asked Questions
Q: Are you a factory or trading company?

A: We are a factory with 25 years of manufacturing experience.

Q: Can you provide samples?

A: Yes, we provide free samples with customers responsible for freight costs.

Q: What is your minimum order quantity?

A: Our MOQ is 3,000 units.

About Hunan Baxiongdi New Material Co., Ltd.

Established in 1999, we are a leading adhesive manufacturer in Changsha, China with certifications including SGS, ROSH, and ISO9001. Our product range includes RTV silicone, liquid nails, threadlockers, acrylic adhesives, and epoxy adhesives.

We welcome OEM partnerships and are committed to providing high-quality products and service to international clients.

Prodotto Tag:

ab adesivo,

ab colla adesiva,

ab adesivo epossidico

Dettagli di contatto
Hunan Baxiongdi New Material Co., Ltd.

Persona di contatto: SU

Telefono: 008615200906996

Fax: 86-731-86677379

Invia la tua richiesta direttamente a noi (0 / 3000)

circa

Colla epossidica AB

Adesivo di resina epossidica super forte per la saldatura dei metalli

AB Adesivo epossidico trasparente e resistente al calore per acciaio inossidabile ad alta temperatura

Sistema di resina epossidica professionale 30 Min Curing Colla trasparente Resina Epossidica

Adesivo acrilico modificato

5 minuti di curatura iniziale adesivo acrilico modificato per superfici rosse e verdi

Jt40 Acrilico Modificato AB Colla Acrilica E Verde Traslucido Con Tempo di Funzionabilità 5min

Colla Acrilica Trasparente Modificata AB 5 Minuti Adesivo Per Necessità Giornaliere

Lasciare messaggio

politica sulla riservatezza | Porcellana buon qualità Colla epossidica AB fornitore. © 2024 - 2025 Hunan Baxiongdi New Material Co., Ltd.. All Rights Reserved.